Questions and Answers from the IOSH Safety Course Interview?

Questions and Answers from the IOSH Safety Course Interview?

The institution of occupational safety and health provides a broad range of health and safety related courses to the corporate industries and individual safety professionals to enhance their competence and to maintain the high level of health and safety standards throughout the organization.

1. What is safety?

It is a condition that gives freedom from danger, risk, accident that can cause injuries, damage and loss of material or material damage and even death.

2. What is the precaution for cutting gas?

·        Keep the fire extinguisher close

·        Keep the fire watching closely?

·        Remove all fuel from the work area

·        Use all the necessary PPE

·        Never place the gas welding cylinder in an enclosed space.

·        Hoses will not be placed on roads.

·        The gas cutting torch must have recoil detectors

·        A gas test will be performed to verify the presence of flammable gas on the site.

·        Good maintenance and ventilation necessary in the work area.

·        The hose connections must be made correctly

3. What is the safety audit?

The safety audit is the process that identifies unsafe conditions and unsafe acts in the plant and the recommended safety improvements.

Going through it assesses the unsafe condition that is visible to the naked eye while working through the plant. (Warehouses, civil works, erection).

Study and review of intermediate details, plus plant design and plant operation.

Integral: evaluates the safety factors in the plant based on engineering, analysis, testing and measurement.

4. What is the survey plan?

 It is the document prepared for the planning of the critical survey by calculating and considering all the factors that will affect the survey and, when selecting the correct tools and cranes, and guaranteeing the safe lifting procedure that must be followed for the elevator in particular. Details such as the size and weight of the object to be lifted, what crane is used to lift and what the safety factor is, where the crane is placed, where the load is lifted, where it is installed, the size and the SWL of each lifting tool used. And the loading graphic is attached with it.

5. What is the color coding system?

  This is the system followed to inspect and ensure the serviceability of the tools, equipment periodically (usually monthly) such as fire extinguishers, full body harnesses, lifting devices, electrical codes and cables, power tools, etc. .

6. What is a risk assessment?

The risk assessment is a method to estimate the risk rate of an activity, classify the current and potential consequences and discover mitigating actions to limit that risk.

7. Safety rules that secure oxygen cylinders?

·        Oxygen cylinders should not be kept near combustible materials.

·        Oxygen cylinders should not be handled with grass-covered hands or gloves.

·        Oxygen cylinders and their accessories should not be tested with an oil-based soap solution.

·        Oxygen cylinders and other fuel gas cylinders should not be stored together.

·        The top cover of the cylinder must be kept in position and screwed in when not in use.

8. What is safety management?

Safety management is an art and science to establish the safety objectives of the industrial company and the related activities of Planning, Administration, Improvement, Various functions to achieve safety objectives.

9. What are Safety surveys?

Safety surveys were conducted to observe all types of physical and environmental conditions, as well as unsafe practices committed to the health and comfort of workers.

10. What is IOSH safety course?

The Occupational Health and Safety institution is an authorized professional body that was started in 1945 around the world to establish, promote and maintain the highest standards of health and safety throughout the world. The occupational health and safety institution offers a wide range of courses related to health and safety to the corporate and professional security industries to improve their competence and maintain the high level of health and safety standards throughout the organization.

The IOSH Course in Chennai is classified mainly into two categories to import health and safety knowledge at all levels of industries.

The IOSH secure management course is designed for security managers, security engineers and other security professionals.

For more information - IOSH safety course in Chennai